Dialogic 6.2 - Manual (Page 272)

General Information
November 2009 272
hooktimer_
offhook_inseize
10 ms Inseizure Filter.
Time that the receive signal bit
must be in-use to be considered
an inseizure from the connected
equipment.
IISDN56_OFHK_INSZ_TIMER_
DEFAULT (5)
50 ms
hooktimer_
offhook_
answer
10 ms Answer Filter.
Filter used on the receive signal
bit during the interval during
which Instant ISDN is looking
for an answer from the
connected equipment.
IISDN56_OFHK_ANS_TIMER_
DEFAULT (10)
100 ms
hooktimer_
min_wink
10 ms Wink Filter.
Minimum off-hook that will be
interpreted as a valid start dial
signal when outgoing start dial
is selected as wink start or delay
dial.
IISDN56_MIN_WINK_TIMER_
DEFAULT (10)
100 ms
hooktimer_
maxmake
10 ms Longest make duration that is
counted as part of a dial pulse.
A longer make signal will cause
digit racking to be terminated.
IISDN56_MAXMAKE_TIMER_
DEFAULT (8)
8 ms
hooktimer_
maxbreak
10 ms Longest break duration that is
counted as part of a dial pulse.
A longer break signal will be
considered the end of a pulse
digit. If the duration eventually
exceeds the value specified in
field critical timer, it is
interpreted as a disconnection
signal.
IISDN56_MAXBREAK_TIMER_
DEFAULT (8)
8 ms
hooktimer_
minmake
10 ms Minimum Dial Pulse Make
Time.
Shortest make region that is
counted as a dial pulse make
region. Anything shorter should
be ignored.
IISDN56_MINMAKE_TIMER_
DEFAULT (1)
1 ms
Table 13. Robbed Bit Signaling Timers (Continued)
Timer Granularity Definition Default Value