Dialogic 6.2 - Manual (Page 167)

voice
November 2009 167
The tstrip program is found in the app.src directory. Bfv API debug
mode is turned on.
Command Syntax
tstrip [-h] [-o ] [-r]
TIFF-F pages are internally constructed so that the image data is
partitioned into strips. If a page that uses MMR data format is
constructed in this way, there are multiple MMR end of data
markers (known as EOFBs), one after each strip of data.
In such cases, the data read for different strips cannot simply be
concatenated together, since an EOFB indicates an end of page.
Because of this, tstrip treats each such strip as a separate page.
voice
The voice program uses the speech-infopkt-file recording and playing
routines to record and play speech. Recording begins when you start
speaking. Recording continues for a maximum of ten seconds or the
time specified in the -n option.
Pressing # on the telephone keypad immediately terminates
playback or recording.
Arguments
-h
Adds a 128-byte Brooktrout header to the
beginning of each file. This header includes the
resolution, width, and number of scan lines.
-o
Uses supplied output filename base to form
filenames instead of “g3data”.
-r
Instructs tstrip to leave the data format as is.
Normally tstrip forces the output into MSB format,
the standard assumed by all other programs
provided by Dialogic.
Specifies the name of the TIFF-F file to convert to
G3 format.