Dialogic 6.2 - Manual (Page 410)

ASCII to Fax Conversion Utility (asctog3)
November 2009 410
ASCII to Fax Conversion Utility (asctog3)
Converts ASCII text files to Brooktrout Group 3 fax image files.
Although this utility is included, in most cases ASCII file
transmission is better accomplished utilizing the ability of the
Brooktrout fax modules to convert ASCII to G3 on-the-fly. This is a
legacy utility.
Command Syntax
asctog3 argument-list
Where:
The ASCII to Fax Utility displays help information on ASCII to
Group 3 file conversion when no arguments are specified. For
example:
asctog3 -imemo.txt -fibmpcps.fnt
converts a text file named memo.txt to a Group 3 fax file using a
standard 80 column font.
-i
(input file) Specifies the input file to convert to Group 3.
-o
(output file) Specifies the output filename. If omitted, an
output file is created with the same input filename but is
given a .3XX file extension.
-mfine
(fine resolution) Specifies fine (200 vertical lines/inch)
resolution. The default is normal resolution (100
lines/inch).
-margin#
(margin) Adds a left margin specified in tenths of an inch
(#). Width is optional and defaults to either 0.5 inch, if the
-margin
option is specified, or to 0 if the -margin option
is not specified.
-f
(font file) Species the font file to use for the conversion.
-lines#
(page length) Specifies the page length in terms of text
lines. Defaults to 66 lines/page for standard 11'' paper.
-nopad
(no pad) Prevents padding short pages to standard 11"
page length. The default pads short pages to 11" length,
regardless of the input file.
-skip#
(letterhead) Makes the first page of output shorter by #
text lines. Leaves room for a letterhead.
-w#
Makes lines of the specified width: 0 = A4, 1 = B4, 2 = A3.