Dialogic 6.2 - Manual (Page 401)

Modifying Configuration Files
November 2009 401
User-Defined Configuration File (btcall.cfg)
The user-defined configuration file contains parameters that set
values such as specific fax formatting. The Brooktrout SDK supplies
a default configuration file named btcall.cfg.
If you have a btcall.cfg file created for a previous release of the
Bfv API, delete the following parameters from the file. These
parameters have been removed or moved to another configuration
file as indicated:
Parameters are listed in any order and typed in either uppercase or
lowercase or both. Only one parameter per line is permitted.
Parameters must be separated from their values: a decimal integer,
a hexadecimal integer, or a character string by one or more spaces.
Commas, colons, and dashes are not valid parameter separators. The
default value is automatically supplied for each missing parameter;
and parameters that do not match any of the valid keywords are
ignored. If a parameter appears more than once, the last occurrence
is the one that will take effect.
For details about parameters and valid values, see the Bfv API
Reference Manual, Volume 6, Appendix A, Configuration Files.
Parameter Description
did_digits This DID digit detection parameter has been modified and moved to the
callctrl.cfg file.
did_variable This DID digit detection parameter has been modified and moved to the
callctrl.cfg file.
digital The call control (callctrl.cfg) configuration file replaces the configuration
file defined by the digital parameter.
isdn The call control (callctrl.cfg) configuration file replaces the configuration
file defined by the isdn parameter.
line_encoding The call control configuration file (callctrl.cfg) that replaces the teleph.cfg
file (see Volume 6 of the Bfv API Reference Manual) does not use this
parameter.
nrings This parameter has been renamed num_rings and moved to the callctrl.cfg
file.
switch_hook This parameter has been renamed flash_hook_duration and moved to the
callctrl.cfg file.
teleph The call control (callctrl.cfg) configuration file replaces the configuration
file defined by the teleph parameter.