Dialogic 6.2 - Manual (Page 24)

Bfv API and Associated Libraries
November 2009 24
By using the Bfv API libraries, the application running on the host
processor can communicate through the Boston driver and firmware
to one or more Brooktrout boards.
Figure 1. Bfv Application Configuration
Fax boards have an exact module number of the TR1034 or TruFax®
board as indicated on the rotary switch on top of the board, so you
can have control over channels on individual boards in a multi-board
system. The Dialogic® Brooktrout® SR140 uses a module number of
0x41 for up to a maximum of 120 channels in a system.
The SR140 does the following:
„ Works on supported Windows® platforms running on Intel
processors.
„ Works with SIP and H.323 IP call control.
„ Operates with only one IP stack at a time.
„ Provides the same level of debugging and tracing that is
available on the TR1034 platform.
„ After configuration and licensing, the same application supports
the SR140 and your hardware based T.38 solution.
„ Because H.323 support occurs wholly within configuration, there
are additional configuration options for H.323 call control that
you can access using the Dialogic® Brooktrout® Configuration