Dialogic 6.2 - Manual (Page 130)

connlist
November 2009 130
Command Syntax
btver [-m ] [-v]
The firmware must be downloaded on a module to obtain its control
processor and DSP information.
connlist
The connlist program lists currently established call switching
connections. Full-duplex connections are always reported as a pair of
simplex TRANSMIT-ONLY connections, where the source and
destination endpoints are swapped for the two halves of the
full-duplex connection.
Turn on the Bfv API debug program from the command line. The
btcall.cfg file is the user configuration file. The connlist program is
found in the bapp.src directory.
Command Syntax
connlist [-m ] [-v]
A receive connection between two given points is identical to a
transmit connection between those same points with the source and
destination interchanged.
Arguments
-m
Display version info for specified module only.
Otherwise display for all.
-v
Turn on Bfv API debug mode.
Arguments
-m
Module number for connections (default 2).
-v
Turn on Bfv API debug mode.