Dialogic 6.2 - Manual (Page 170)

wave
November 2009 170
Command Syntax
voiceraw [options]
Not all coding formats and rate combinations are available on all
products.
Requires one -p or -r argument.
wave
The wave program uses the speech-wave-file recording and playing
routines to record and play speech. Recording begins when you start
speaking. Recording continues for a maximum of ten seconds or the
time specified in the -n option.
Pressing # on the telephone keypad immediately terminates
playback or recording.
Arguments
-c
Call given number, else wait for ring.
-f
Specify coding format; use the number of the
format or one of the following names. If there is no
number specified, you must use the name.
adpcm
adpcm32
adpcm24
pcm_ulaw
pcm_ulaw64
pcm_ulaw48
pcm_ulaw88
pcm_alaw
pcm_alaw64
pcm_alaw48
pcm_alaw88
1
2
3
-l
Loop forever, sending or receiving.
-n
Specify recording time in seconds.
-p
Play.
-r
Record (default 10 seconds).
Name of the file to play or record.
-u
Use specified channel.