Dialogic 6.2 - Manual (Page 274)

General Information
November 2009 274
outseize_ack_
timer
50 ms CO Outseize Acknowledge
Timer.
Time to continue looking for the
outgoing start dial signal from
the connected equipment on
outseizure before declaring an
outseizure failure.
IISDN56_OUTS_ACK_TIMER_
DEFAULT (60)
3 seconds
ringing_timer 50 ms Duration of ring signal during
the ring cycle on outbound calls
(FXS Loop Start and FXS
Ground Start calls only).
IISDN56_RINGING_TIMER_
DEFAULT (40)
2 seconds
Table 13. Robbed Bit Signaling Timers (Continued)
Timer Granularity Definition Default Value