Dialogic 6.2 - Manual (Page 264)

November 2009 264
7 - Robbed Bit Signaling
This chapter describes robbed bit signaling as used with BSMI-level
call control.
The chapter has the following sections:
„ General Information
„ Wink Start & Delay Dial Signaling
„ Wink Start with Feature Group B & D
„ Immediate Start/Fixed Pause Signaling
„ Ground Start Signaling
„ Loop Start Signaling
„ FXO Loop Start
General Information
This chapter covers protocols Dialogic supports for interfacing with
the Local Exchange Carrier (LEC) Network (that is, the North
American Telephone Network).
Note:
This chapter applies only to BSMI (low-level call control)
users. Bfv call control users do not need to be concerned with
this information.