Dialogic 6.2 - Manual (Page 140)

fax
November 2009 140
Command Syntax
eccllvoice [options] infopktfile
Requires one -p or -r argument.
fax
The fax program uses the highest level infopkt file fax sending and
receiving routines to send or receive facsimiles. The local ID is
specified from the command line. (This application is very similar to
faxhl.c.)
Bfv API debug mode is turned on. The btcall.cfg file is the user
configuration file. The fax program is found in the app.src directory.
Arguments
-c
Call given number, else wait for ring.
-f
Specify record coding format 1 ; use the number of
the format or one of the following names. If there
is no number specified, you must use the name.
1. Not all coding formats and rate combinations are available on all
products.
adpcm
adpcm32
adpcm24
pcm_ulaw
pcm_ulaw64
pcm_ulaw48
pcm_ulaw88
pcm_alaw
pcm_alaw64
pcm_alaw48
pcm_alaw88
1
2
3
-l
Loop forever, sending or receiving.
-n
Specify recording time in seconds.
-p
Play.
-r
Record (default 10 seconds).
-u
Use specified channel.
-v
Enable Bfv API debug mode.