Dialogic 6.2 - Manual (Page 260)

Using Third Party IP Stacks
November 2009 260
#
[module.41]
vb_firm=/usr/sys/brooktrout/boston/fw/bostvb.so
# This parameter should be set to the number of channels
licensed for the SR140 product
channels=30
[module.41/ethernet.1]
ip_interface=eth0
TR1034 Board-Based Integration - Linux
The following callctrl.cfg configuration is an example for a TR1034
board based integration for Linux in the default installation
directory.
# callctrl.cfg
#
# Sample Call Control configuration file for Boston Bfv
API with Tr1034.
#
[module.2]
cc_type=1
channels=30
set_api=bfv
pcm_law=mulaw
[module.2/clock_config]
clock_mode=master
clock_source=internal
clock_compatibility=none
bus_speed=2
master_ref_fallback=disabled
master_drive=clock_a
[module.2/ethernet.1]
# Specify a staic IP address such as 192.168.0.2
ip_address=0.0.0.0