Altera Avalon Verification IP Suite - Manual (Page 78)

Chapter 5: Avalon-MM Monitor 5–15
Application Program Interface
May 2011 Altera Corporation Avalon Verification IP Suite User Guide
set_enable_c_waitrequested_write()
set_enable_c_write()
set_enable_c_write_with_and_without_writeresponserequest()
set_enable_c_write_after_reset()
set_enable_c_write_burstcount()
Prototype: set_enable_c_waitrequested_write().
Arguments: Boolean .
Returns: void .
Description: Enables a coverage group to test all values of the wait request timeout
parameter. This method is disabled if
write or waitrequest are not
supported, or if the wait request timeout period is less than 1.
Prototype: set_enable_c_write().
Arguments: Boolean .
Returns: void .
Description: Enables a coverage group to test write transfers. This method is disabled
when writes are not supported.
Prototype: set_enable_c_write_with_and_without_writeresponserequest().
Arguments: Boolean .
Returns: void .
Description: Enables a coverage group to test write transactions with or without
writeresponserequest .
Prototype: set_enable_c_write_after_reset().
Arguments: Boolean .
Returns: void .
Description: Enables a coverage group to test write transfers after reset.
Prototype: set_enable_c_write_burstcount().
Arguments: Boolean .
Returns: void .
Description: Enables a coverage group to test different sizes of burstcount during
write burst transfers. It tests all possible values of burstcount . This
method is disabled when either burst transfers or writes are not supported,
or the maximum burst is less than 1.