Altera Avalon Verification IP Suite - Manual (Page 71)

5–8 Chapter 5: Avalon-MM Monitor
Application Program Interface
Avalon Verification IP Suite User Guide May 2011 Altera Corporation
set_enable_a_no_write_during_reset()
set_enable_a_readid_sequence()
set_enable_a_read_response_sequence()
set_enable_a_read_response_timeout()
set_enable_a_register_incoming_signals()
Prototype: set_enable_a_no_write_during_reset() .
Arguments: Boolean .
Returns: void .
Description: Enables an assertion that ensures write is deasserted if reset is
asserted. Disabled when write is not supported.
Prototype: set_enable_a_readid_sequence() .
Arguments: Boolean .
Returns: void .
Description: Enables an assertion that verifies if the readid sequence follows the
sequence of the transactionid .
Prototype: set_enable_a_read_response_sequence() .
Arguments: Boolean .
Returns: void .
Description: Enables an assertion that ensures readdatavalid is asserted while read
is asserted for the same read transfer.
Prototype: set_enable_a_read_response_timeout() .
Arguments: Boolean .
Returns: void .
Description: Enables an assertion that ensures readdatavalid is asserted within
maximum allowed timeout period. Disabled when either readdatavalid
is not supported or the maximum allowed timeout period is less than 1.
Prototype: set_enable_a_register_incoming_signals() .
Arguments: Boolean .
Returns: void .
Description: Enables an assertion that ensures waitrequest is asserted at all times
and deasserts a single clock cycle after a read or write transaction.