Altera Avalon Verification IP Suite - Manual (Page 74)

Chapter 5: Avalon-MM Monitor 5–11
Application Program Interface
May 2011 Altera Corporation Avalon Verification IP Suite User Guide
set_enable_c_b2b_write_write()
set_enable_c_continuous_read()
set_enable_c_continuous_readdatavalid()
set_enable_c_continuous_waitrequest()
set_enable_c_continuous_waitrequest_from_idle_to_read()
Prototype: set_enable_c_b2b_write_write().
Arguments: Boolean .
Returns: void .
Description: Enables a coverage group to test back-to-back write transfers. This method
is disabled if writes are not supported.
Prototype: set_enable_c_continuous_read().
Arguments: Boolean .
Returns: void .
Description: Enables a coverage group to test continuous read transfers from 2 cycles
until
AV_MAX_CONTINUOUS_READ . Continuous read cycles of more than
AV_MAX_CONTINUOUS_READ goes to another bin.
Prototype: set_enable_c_continuous_readdatavalid().
Arguments: Boolean .
Returns: void .
Description: Enables a coverage group to test continuous readdatavalid transfers from 2
cycles until
AV_MAX_CONTINUOUS_READDATAVALID . Continuous read
cycles of more than AV_MAX_CONTINUOUS_READDATAVALID goes to
another bin.
Prototype: set_enable_c_continuous_waitrequest().
Arguments: Boolean .
Returns: void .
Description: Enables a coverage group to test continuous waitrequest transfers from 2
cycles until
AV_MAX_CONTINUOUS_WAITREQUEST . Continuous read cycles
of more than AV_MAX_CONTINUOUS_WAITREQUEST goes to another bin.
Prototype: set_enable_c_continuous_waitrequest_from_idle_to_read().
Arguments: Boolean .
Returns: void .
Description: Enables a coverage group to test waitrequest transfers from their idle
state until a waitrequest read.