Pilz PMCprimo DriveP.06/AA0/4/0/0/208-480VAC - Manual (Page 70)

Operation
Operating Manual PMCprotego S2­2(­C)
1002529­EN­02 70
8.4 Messages
Any errors on the safety card are indicated on the servo amplifier display with message
"F31".
The following options are available for detailed diagnostics and fault detection:
} LEDs on the front of the safety card provide information on operating states (see sec­
tion on "Display elements" in this chapter).
} Outputs on the safety card display the state of the safety functions (e.g. STO Acknow­
ledge).
} Errors and messages are entered in the safety card's error stack.
} The following are displayed in online mode in the Configurator PASconfig SDrive:
– Safety card status messages and error messages (error stack)
– States of safety card inputs and outputs
– Errors and states of inputs and outputs on the motion control system
See also "Servo amplifier configuration software"
} Errors, messages and the corresponding remedies are displayed in the expanded dia­
gnostics system PVIS.