5 installation, 1 general requirements, 2 dimensions – Pilz PMCprimo DriveP.06/AA0/4/0/0/208-480VAC User Manual
Page 47: Section 5, Installation, General requirements, Dimensions, 5installation
Installation
Operating Manual PMCprotego S22(C)
1002529EN02
47
5
Installation
5.1
General requirements
Please also refer to the operating manual for the servo amplifier.
CAUTION!
Damage due to electrostatic discharge!
Electrostatic discharge can damage components. Ensure discharge before
touching the safety card, e.g. by touching an earthed, conductive surface or
by wearing an earthed armband.
5.2
Dimensions
103 (4.06")
87,5 (3.45")
142 (5.59")
18,5
(0.73")
POWER
RUN
CONFIG
STO
Fig.: Dimensions stated in mm (")
This manual is related to the following products:
- PMCprimo DriveP.24/ABB/4/0/0/208-480VAC PMCprimo DriveP.06/AB0/2/0/0/208-480VAC PMCprimo DriveP.06/AB0/3/0/0/208-480VAC PMCprimo DriveP.24/AA0/5/0/0/208-480VAC PMCprotego D.06/000/0/0/2/208-480VAC PMCprotego D.24/000/0/0/2/208-480VAC PMCprotego D.06/010/0/0/2/208-480VAC PMCprotego D.06/100/0/0/2/208-480VAC PMCprotego D.06/200/0/0/2/208-480VAC PMCprotego D.24/200/0/0/2/208-480VAC PMCprotego D.24/100/0/0/2/208-480VAC PMCprotego D.24/010/0/0/2/208-480VAC PMCprotego S2-2 PMCprotego S2-2-C