Pilz PMCprimo DriveP.06/AA0/4/0/0/208-480VAC - Manual (Page 65)

Commissioning
Operating Manual PMCprotego S2­2(­C)
1002529­EN­02 65
INFORMATION
If any of the parameters for the safety functions have been changed, the
check must be repeated and this must be recorded in the test report.
Regular checks
Check the safety functions at regular intervals. The aim of these regular checks is to un­
cover any changes to the plant/machine, safety functions and ambient conditions.
You must comply with the requirements of the applicable national regulations.
The intervals you select will depend on the application, the overall system and the associ­
ated risk analysis. The test interval should not exceed one year.