Pilz PMCprimo DriveP.06/AA0/4/0/0/208-480VAC - Manual (Page 62)

Commissioning
Operating Manual PMCprotego S2­2(­C)
1002529­EN­02 62
Key:
1 Downloading a configuration from the Configurator directly to safety card 1
2 Downloading a configuration via an SD card, which is written by the PC
3 Inserting an SD card into the read device of the servo amplifier for safety card 1
4 Downloading a configuration to the safety card from an SD card in the servo amp­
lifier
5 Downloading a configuration via an SD card, which is written by the servo ampli­
fier (safety card 2)
6 Inserting an SD card from the servo amplifier for safety card 2 into the read device
of the servo amplifier for safety card 3
7.3.3.1 Download configuration from Configurator to safety card
1 The configuration data on the safety card can be downloaded directly from the Configur­
ator to the safety card in the servo amplifier.
Prerequisite:
} Connection is established between the PC and servo amplifier (RS 232 or Ethernet).
Procedure:
} Select Online Mode ­> Download Project in the safety card's Configurator.
INFORMATION
Further information is available in the safety card Configurator's online help.
7.3.3.2 Download configuration to SD card
2 5 You can download the configuration data to the safety card via an SD card. The con­
figuration data must first be saved to the SD card.
There are two options for downloading a configuration to an SD card:
1. option 2 : Downloading a configuration via an SD card, which is written by the PC.
Prerequisite:
a Connection to an external SD card read device
Procedure:
– Select Project ­> Save to SD Card in the safety card's Configurator.
– Remove the SD card from the external SD card read device and insert it into the
servo amplifier's SD card read device 3 (continue as described under "Download
configuration from SD card to safety card").