Pilz PMCprimo DriveP.06/AA0/4/0/0/208-480VAC - Manual (Page 48)

Installation
Operating Manual PMCprotego S2­2(­C)
1002529­EN­02 48
5.3 Installing the safety card
The expansion card is installed in slot 3 of the servo amplifier. When installing, please note
the guidelines given under "Installation" in the operating manual for the servo amplifier.
1.Remove the film. 2. Break the middle link 3. Break the top link and
lever out the cover plate
4. Using suitable pliers, pull out the blank in the safety card
plug 5. Plug in the safety card
and tighten the screws