Pilz PMCprimo DriveP.06/AA0/4/0/0/208-480VAC - Manual (Page 6)

Content
Operating Manual PMCprotego S2­2(­C)
1002529­EN­02 6
6.4 Digital inputs 52
6.5 Digital outputs 52
6.5.1 Supply voltage 52
6.5.2 Single­pole outputs 54
Section 7 Commissioning 55
7.1 Safety guidelines 55
7.2 Initial commissioning 55
7.3 Recommissioning 58
7.3.1 Recommissioning at a restart 58
7.3.2 Recommissioning after error 59
7.3.2.1 Switching the inputs "SS1 Activate" or "Reset" 59
7.3.2.2 Command "CLRFAULT" 60
7.3.3 Swap safety card 61
7.3.3.1 Download configuration from Configurator to safety card 62
7.3.3.2 Download configuration to SD card 62
7.3.3.3 Download configuration from SD card to safety card 63
7.4 Safety checks 64
Section 8 Operation 66
8.1 Operating states 66
8.2 Testing the safe pulse disabler 67
8.3 Display elements 69
8.4 Messages 70
Section 9 Technical details 71
9.1 Safety characteristic data 73
9.1.1 Safe actuator with one encoder 73
9.1.1.1 MTTF >= 10 years 73
Section 10 Order reference 74
Section Glossary 75