EXFO FTB-7000 OTDR Series for FTB-500 - Manual (Page 74)

Testing Fibers in Auto Mode
60 OTDR
4. Select the Auto mode.
4a. From the main window, press Setup then select the Mode tab.
4b. Under Mode, select Auto.
³
If you want to edit fiber settings after the test, select the Enable
Editing for Current Trace Settings box. Clear the box if you prefer
not to edit the settings.
³
If you always want to start in Auto mode, select the corresponding
box. Clear the box if you prefer to select the test mode yourself.
4c. Press Apply to confirm, then OK to return to the main window.
5. Go to the OTDR pane.
6. If your OTDR supports singlemode, singlemode live, or multimode
wavelengths, under Wavelengths, from the list, select the desired fiber
type (for live-fiber testing, select SM Live; for C fiber, select 50 μm and
for D fiber, select 62.5 μm).
6
7