EXFO FTB-7000 OTDR Series for FTB-500 - Manual (Page 142)

Customizing the Application
128 OTDR
Selecting an OTDR Setup
Selecting an OTDR Setup
You can select which OTDR setup you will use for your test session. There
are two possibilities:
³
Current Setup: to retrieve the last configuration used.
³
Saved Setup: to specify which of the saved configurations you want to
use.
To select an OTDR setup:
1. From the main window, press the Setup button.
2. From the Setup dialog box, select the General tab.
3. In the Configure OTDR Using list, select Current Setup.
OR
Select Saved Setup and from the Saved Setup dialog box, select an
OTDR setup.
4. Press Apply then OK.