EXFO FTB-7000 OTDR Series for FTB-500 - Manual (Page 228)

Creating and Printing Trace Reports
214 OTDR
Customizing the Report
The following table shows the various items that can appear on a report:
Item appearing on the report Summarized Compressed Multi-trace
Job information: test date and time (including
the time zone), unit serial and model
numbers, company, job and customer ID,
operators A and B.
X X
Cable information: a single table containing
information such as the fiber ID, cable ID,
location A and B.
X X
Link measurements: link length and loss,
average loss, splice loss, and span ORL.
X X
Trace X X X
Event table (with fiber sections): If you
configured the application to display fail or
warning results (from the Setup window),
the failed results will appear in white on a
black background. The results with a warning
status will appear in black on a grey
background (all other printers). Otherwise,
results having a fail or a warning status will
not be “highlighted”.
X X
Pass/Fail thresholds: loss, reflectance, fiber
section attenuation thresholds as they are
defined in Setup (Thresholds tab).
Note: Selecting this item will not
highlight the results having a
fail or warning status in the
report. You must select Fail or
Warning in the Setup and
include the Event table item in
your report.
X X