EXFO FTB-7000 OTDR Series for FTB-500 - Manual (Page 45)

Setting Up Your OTDR
OTDR 31
Defining Cables
3. Enter the desired location:
3a. From the appropriate Locations box (A or B), type the location
directly.
OR
Press the button next to the A (or B) box.
3b. Select a location from the list, or type the name in the upper box.
4. Press OK to confirm your selection.
The selected name becomes the current cable name.
5. Repeat the same procedure for Location B.
6. Press Apply to confirm the changes, then OK to return to the main
window.
To transfer location to the
list
To remove location from
the list