Avaya P460 - Manual (Page 84)

Chapter 2 Avaya P460 CLI Commands
74 Avaya P460 Reference Guide
The syntax for this command is:
set broadcast storm control
Example:
set broadcast storm control threshold
User level: read-write, admin.
Use the set broadcast storm control threshold command to set the
broadcast storm control threshold.
The syntax for this command is:
set broadcast storm control threshold
Example:
set device-mode
User level: read-write, admin.
Use the set device-mode command to set the switch mode – Layer 2 or Router
(Layers 2 and 3).
enable Enable broadcast storm control
disable Disable broadcast storm control
P460-1# set broadcast storm enable
Done!
threshold In pps (packets per second) from 10 to 144,000 pps
The default value is 500
P460-1# set broadcast storm control threshold 1000
Done!