Avaya P460 - Manual (Page 194)

Chapter 2 Avaya P460 CLI Commands
184 Avaya P460 Reference Guide
Use the validate-group command to verify that all the rules in a priority list are
valid.
L If there is a configuration problem with a specific rule, or with a number of
rules, detailed error messages will be given.
The syntax for this command is:
validate-group [quiet]
Example:
username
User level: admin.
Adds a local user account.
L By default there is only a single user account, named 'root', with password
'root', which access the administrator level. You cannot delete this basic user
account, nor modify its access level, but can modify its basic password.
The syntax for this command is:
username password access-type {read-only|read-
write|admin}
quiet does not display error messages
Router-1(configure)# validate-group 101
name New user name (minimum four characters)
passwd User’s password (minimum four characters)
access-type Access type definition - read only, read-write or
administrator