Avaya P460 - Manual (Page 110)

Chapter 2 Avaya P460 CLI Commands
100 Avaya P460 Reference Guide
The syntax for this command is:
set port vlan /
Example:
set port vlan-binding-mode
User level: read-write, admin.
Use the set port vlan-binding-mode command to define the binding method
used by ports.
The syntax for this command is:
set port vlan-binding-mode [port_list] [value]
vlan_num Number identifying the VLAN.
module The module number
port Number of the port on the module.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
P460-1# set port vlan 2 3/5
VLAN 2 modified.
VLAN Mod/Ports
---- ---------------------------
2 3/5
port list Switches and ports to bundle (format: module/port)
value • static - the port supports only the VLAN as configured per
port
• bind-to-configured - the port supports the VLANs
configured on the device
• bind-to-all - the port support the whole range of VLANs
on the device