Avaya P460 - Manual (Page 38)

Chapter 2 Avaya P460 CLI Commands
28 Avaya P460 Reference Guide
The syntax for this command is:
disable interface [outband | inband]
Example:
enable interface
User level: read-write, admin.
Use the enable interface command to enable the inband and outband
interfaces.
The syntax for this command is:
enable interface {outband | inband}
Example:
outband Disables the outband interface
inband Disables the inband interface
P460-1# disable interface outband
You must reset the device in order for the change to take
effect.
outband Enables the outband interface
inband Enables the inband interface
P460-1# enable interface inband
This command will RESET the device
*** Reset *** - do you want to continue (Y/N)? Y
Attaching network interface lo0... done.
Welcome to P460
SW version 1.0.1
Login: