Avaya P460 - Manual (Page 79)

Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 69
rmon history
User level: read-write, admin.
Use the rmon history command to create an RMON history entry.
The syntax for this command is:
rmon history [[]] interval
buckets owner
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
router ospf
User level: read-write, admin.
Use the router ospf command to enable the OSPF protocol on the system.
Use the no router ospf command to disable the OSPF one the system.
The default is disabled.
The syntax for this command is:
[no] router ospf
Example:
history_index This is the history index number of this entry (it is advisable to
use the same interface number as your history index number).
module/port The switch number/the port number.
interval The interval between 2 samples.
number of
buckets The number of buckets defined.
owner name The owner name string.
P460-1# rmon history 1026 1026 3/2 30 buckets 20 owner amir
history 1026 was created successfully
Router-1 (super) # router ospf
Done!