Avaya P460 - Manual (Page 154)

Chapter 2 Avaya P460 CLI Commands
144 Avaya P460 Reference Guide
Example:
show l2-config
User level: read-write, admin.
Use the show l2-config command to display comprehensive Layer 2
configuration information.
Router-1> show ip vrrp detail
VRRP is globally enabled
Virtual Router on VLAN: 1
Router-id: 1
State: MASTER
Priority: 255
Advertisement Interval: 1
Last State Change: 00:00:00
Override Address Ownership Rule: No
Authentication Type: None
Authentication Key: ""
Master IP Address 192.168.66.23
Has 1 IP addresses
IP addresses:
192.168.66.23
Primary IP Address: 192.168.66.23
Primary IP Address was chosen by default
Preemption Mode: enabled
# of times Master: 2
# of received Advertisements: 0
# of transmitted Advertisements: 20
# of received Advertisements with Security Violations: 0
Virtual Router on VLAN: 1
Router-id: 2
State: BACKUP
Priority: 100
Advertisement Interval: 1
Last State Change: 00:00:00
Override Address Ownership Rule: No
Authentication Type: None
Authentication Key: ""
Master IP Address 0.0.0.0
Has 1 IP addresses
IP addresses:
192.168.66.24
Primary IP Address: 192.168.66.23
Primary IP Address was chosen by default
Preemption Mode: enabled
# of times Master: 1
# of received Advertisements: 0
# of transmitted Advertisements: 13
# of received Advertisements with Security Violations: 0