Set system name – Avaya P460 User Manual
Page 124

Chapter 2
Avaya P460 CLI Commands
114
Avaya P460 Reference Guide
variable
The syntax for this command is:
set system location
[string]
Example:
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
set system name
User level: read-write, admin.
Use the set system name command to set the mib2 system name MIB variable.
The syntax for this command is:
set system name
[string]
Example:
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
string
• The location name string should be typed inside inverted
commas.
• The location is cleared if you leave this field blank.
P460-1# set system location “tech-support”
*** Set system location ***
system location set
string
• The system name string should be typed inside inverted
commas.
• The name is cleared if you leave this field blank.
P460-1# set system name “P460-1”
*** Set system name ***
system name set