Avaya P460 - Manual (Page 170)

Chapter 2 Avaya P460 CLI Commands
160 Avaya P460 Reference Guide
show port classification
User level: read-write, admin.
Use the show port classification command to display a port’s
classification.
The syntax for this command is:
show port classification [module/[port]]
Example:
show port flowcontrol
User level: read-only, read-write, admin.
Use the show port flowcontrol command to display per-port status
information related to flow control.
The syntax for this command is:
show port flowcontrol [[/]]
module Number of the module (3-6). If you do not specify a
number, the ports on all the modules are shown.
port
(Optional) Number of the port on the module. If you do not
specify a number, all the ports on the module are
shown.
You can also specify a range of ports separated by a
dash, for example, 4/5-13 for ports 5 to 13 on
module 4.
P460-1> show port classification 4/8
Port Port Classification
------ ---------------------
4/8 regular
P460-1> show port classification 4/9
Port Port Classification
------ ---------------------
4/9 valuable
module
(Optional) Number of the module (3-6). If you do not specify a number, all
modules are shown.