Opening an ,xxx file along with a .bmp or .wmf fiu, Opening an xxx file along with a bmp or wmf, Professional sew-ware – SINGER PSW 1.10-WORKBOOK User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Professional Sew-Ware
Opening an ,xxx File Along With a .bmp or .wmf FiU
Opening a Partially Digitized Design (.xxx file) Along With the
Corresponding Image (.bmp or ,wmf file)
This feature allows both files to be open at the same time to finish or edit a digitized
design.
1. With the left mouse, click once on FILES. Then click the left mouse once on LOAD
2. In the LOAD dialog box, choose the DRIVE: where the design xxx was saved.
Click the mouse once to highlight the file and click OK. Or double click the left
mouse on the file name.
3. The OPEN dialog box will now appear. Choose the Drive: where the bmp or .wmf
file was saved.
4. If necessary, select the File Type to choose the correct file format.
5. Click the left mouse once to highlight the file, then click OK. Or double click the left
mouse on the file name.
6. The image file along with the digitized file will open.
7. Continue digitizing or editing the design.
43