SINGER W203 User Manual
SINGER Sewing machines
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- SINGER
- INSTRUCTIONS
- DESCRIPTION
- Speed
- Need Ies
- Oiling the Mach ine
- Th read
- To Set the Need Ies
- To Remove the Bobbins
- To Wind the Bobbins on Machines IU5wl03 and IU5w203
- To Wind the Bobbins on Machine IU5w303
- To Replace the Bobbins and Thread the Bobbin Cases
- Threading the Needles
- To Raise or Lower the Presser Feet
- To Prepare for Sewing
- To Commence Sewing
- To Remove the Work
- Tens i ons
- To Regulate the Tensions
- To Regulate the Length of Stitch
- To Regulate the Pressure on Material
- To Set the Needle Bar
- To Set a Needle Bar Which Has No Mark
- To Change the Amount of Lift of the Alternating Pressers
- To Adjust the Relative Height of Lift of the Vibrating and Lifting Pressers
- Relative Positions of Vibrating Presser Bar and Lifting Presser Bar
- To Time the Sewing Hook
- To Set the Sewing Hooks To or From the Needles
- To Remove the Bobbin Cases from the Sewing Hooks
- To Remove the Sewing Hooks from the Machine
- To Raise or Lower the Feed Dog
- To Remove the Needle Bar Rock Frame Rock Shaft
- To Remove the Arm Shaft Connection Belt from within the Arm
- To Re-engage the Safety Clutch
- To Adjust the Hand-Wheel Shaft on Machine IU&W303
- Parts Required for Changing the Gauge of a Machine
- INSTRUCTIONS