Philips LCD PROJECTOR - Manual (Page 9)

R
emote
C
ontrol
O
peration of a
VCR
When using the Projector remote with your
VCR, first make certain it is set to control the
VCR by the REMOTE CODE or
SEARCH method. See page 44-
1 / Slide the TV-VCR-CBL button
e remote to the VCR position. on
Point the front of the remote
towards the front of the VCR (remote
sensor window) when pressing buttons.
Remember. The VCR function
buttons on the Projector remote will
not operate your VCR if it does not have
those features.
1^ Remember. Position TV on this
remote means Projector.
RECORD BUTTON
Hold the RECORD button down and then
press the PLAY button to begin a VCR
recording.
REW(TND> BUTTON -------------------------
Press to rewind tapes. For some VCRs you
may need to press the STOP button first,
then REWIND. In the Playback mode, hold
REW button down to view picture moving
rapidly in reverse.
TV..VCR BUTTON -----------------------------
Press to the VCR position (“VCR”
indicator on the VCR will light) to view
die playback of a tape. Press again to place
in the TV position (“VCR” indicator on
the VCR will go OFF) to view one program
on the TV while recording another program
on the VCR.
TV>VCR-CBL SWITCH------------------------
Slide to VCR to control your VCR, using
the remote.
POWER BUTTON
Press to turn the VCR ON and OFF.
PLAYBUTTON
Press to playback a tape. Hold down after
pressing the RECORD button to start a
recording.
EF (FAST FORWARD) BUTTON
Press to rapidly advance the tape. For some
VCRs you may need to press STOP first, then
FF. In Playback mode, hold button down to
view the picture moving rapidly in the forward
direction.
CHfannel) SCAN BUTTONS
Press to scan up or down through VCR
chaimel numbers.
STOP BUTTON
Press to stop the tape.
PAUSE BUTTON
Press to temporarily stop the tape during a
playback or recording. Press again to release
PAUSE.
NUMBER BUTTONS
Press buttons for direct VCR channel
selections or menu items.