Philips LCD PROJECTOR - Manual (Page 49)

How TO O
perate
C
able
C
onverters with the
P
rojector
R
emote
Y our remote control is set to work your
Projector and many infrared remote (IR)
control Cable Converters. However, an easy
one-time step may be necessary before the
remote will work your Converter.
Try this initial check to see if going on to the
folhwing section is necessary.
I BEGIN I
Slide the TV-VCR (Video
Cassette Recorder)-CBL (Cable) switch on
the remote to CBL.
Point remote toward Cable
Converter and press the CBL POWER
button.
Cbes the remote turn the
Converter on?
IF YES, 1^ and try the CH(annel)
A (UP) ▼ (EXDWN) and number buttons
on the remote. If they also work the
Converter, then the remote is ready and no
further steps are needed.
IF NO, continue.
Cable
Converter
First look up a TWO-DIGIT
remote code number (see table alongside) for
your brand Converter before going through
the simple " 1 , 2 ,3, 4 " steps on the following
page.
If more than one number is listed,
you may have to try more than the first two-
digit code given in order to locate your
Converter's remote control.
Remote Control Cable Converter Code Chart
CONVERTER REMOTE
BRAND CODE№
Archer 28
Diamond 23
Hamlin 15,15
Hitachi 25
Jerrold 01,02,03,04,05,30
Macom 29
Magnavox 17,26,31
Oak 26
Oak Sigma 06
Panasonic 18,35
Magnavox 19, 20, 21,24, 26
Pioneer 09,32
Rembrant 33
Regency 10,11
Scientific Adanta 08, 22
Sheritech 34
Sylvania 16
Texscan 16
Tocom 12,13
Universal 36
Viewstar Philips 26
Zenith 07
(Continued on next page)
49