Philips LCD PROJECTOR User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How
TO O
perate
C
able
C
onverters
with
the
P
rojector
R
emote
N
’ow that you have looked up the two-di^t
Remote Code Number for your brand of
Cable Converter (on previous page), you are
ready to follow the four simple steps below.
Please read throng steps i - 4 before beginning.
BEGIN
Cassette Recorder)'CBL (Cable) switch
to CBL.
Press and release the RECORD
button, and then press and release the CBL
(Cable) POWER button.
<2>
Within ten seconds after releasing
the CBL POWER button, ENTER THE
TWO DIGIT CODE NUMBER for the
desired Converter (see list).
The remote is now ready to send commands
to the Converter.
<^4>
Point the remote at the Converter.
Press the CBL POWER button on the
remote to turn the Converter on.
Try it out. The channel and
POWER buttons on the remote should now
operate the Converter.
1
^ Remember, if this 1, 2,3,4
procedure doesn't work the first time, repeat
steps using the same remote code number.
IF after a second attempt the remote does
not operate your Converter, and there are
more code numbers listed for your brand
Converter, try the next listed code number.
IF after repeated attempts the code number
procedure does not work your Converter, try
the "CONVERTER SEARCH" method.
Remote
(Continued on next page)
50