Philips LCD PROJECTOR - Manual (Page 25)

I nput (T uning ) C ontrol A djustments ( continued )
2. CHANNEL SCAN
Y ou can autormticaRy preset the Projector to
select only the channel numbers available
in your area (or on your Cable TV system).
Only channels added into the Projector's memory
will be selected when the CH(annel) A (UP)
▼ (DOWN) buttons are pressed on the remote.
I BEGIN I
With the INPUT Menu displayed,
press 2 for CHANNEL SCAN.
Press the A ▼ buttons on the
remote to select AUTO PROGRAM
CHANNELS.
Press the (+) or (-) buttons to begin
the AUTO PROGRAMMING of channel
numbers.
CHANNEL SCAN "ON" confirms the
channels as they are added into memory.
"FINISHED" appears when the Auto
Programming is complete and the Input
Menu is displayed again.
Press the STATUS/EXIT button
to clear the screen.
Try it out. Press the CHANNEL
A or ▼ buttons and "scan" from channel to
channel.
1^ Remember. To add additional
channels to (or delete unwanted channels
from) the Projector's memory, see the
SELECT CHANNELS section shown below.
To manually add (or delete) channels into the
FAVORITE STATION MEMORY;
BEGIN I
o With the INPUT Menu displayed,
press 2 for CHANNEL SCAN.
Press the A ▼ buttons to select
die SELECT CHANNELS control position.
Press the CH(annel) A (UP) ▼
(EGWN) buttons to select channel you wish
to add (or delete).
Note: The channel NUMBER buttons (on
the remote) may also be used to select
channels.
Press the (+) or (-) buttons to add
or delete channels.
I NORMAL I CABLE
1. TUNING______
|2. CHANNEL SCAN I
3. PICTURE SOURCE
INPUT Screen:
CHANNEL SCAN
Selected
CHANNEL ’ SCAN
69 ON
I SELECT CHANNELS I
AUTO-PROGRAM CHANNELS
PUSH El TO AUTO-PROGRAM
FAVORITE STATION MEMORY
SELECT CHANNELS________
I AUTO-PROGRAM CHANNELS I
CHANNEL ' SCAN
2 ON
AUTO-PROGRAMMING
So ©,
SO©
®
CHANNEL SCAN
69
,----
AUTO-PROGRAMMING
FINISHED
Remote
CHANNEL SCAN
69 ON
SELECT CHANNELS
AUTO-PROGRAM CHANNELS
"ON" appears to confirm that a channel
has been added.
"__ appears below the word SCAN to
confirm a channel has been deleted.
25