Philips LCD PROJECTOR - Manual (Page 15)

G etting S tarted - A udio C onnections
EXTERNAL SPEAKERS
'’ou can connect external speakers to enjoy
stereo TV programs.
BEGIN I
Connect external speakers to die
speaker wire terminals on the Projector.
Speakers; 8 ohm, 10 watt minimum.
Turn Projector on. Select AUDIO
Menu and place the Projector in the
STEREO mode (See page 21).
Place the speakers so you enjoy
good stereo sound.
I BEGIN I
Connect the R(ight)and L(eft)
AUDIO OUT(put) jacks on the Projector
to the R and L AUDIO IN (put) jacks on
your amplifier or sound system.
Nv' First turn your Projector on; then
your audio system. Adjust the sound level
coming from the Projector with the audio
amplifier VOLUME control.
Remember. The audio system may
have to be in AUX mode to play the sound
of TV programs.
PC (VGA OR MAC II-INPUT)
Y ou can connect a personal computer to
display the computerscreens onto the
Projector screen
AUDIO OUTPUT JACKS
T he AUDIO OUT(put) jacks on the rear of
the Projector may be used to play the sound
of TV programs througji an audio hi-fi system.
Back of Projector
First turn OFF your computer and
Projector.
Use a Sub'D plug to connect your
computer to the DATA input socket.
If available, connect the audio (R+L,
or mono) to the RCA jacks of AUX 2 (See
page 7).
L □
O EXTERNAL SPEAKERS O
4
gg
External Speakers
Projector Back Panel
AUDIO SYSTEM
Computer Back Panel
15