To switch off, Front of projector, Projector back panel – Philips LCD PROJECTOR User Manual
Page 16: Etting, Tarted, Asic, Rotector, Peration
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
G
etting
S
tarted
- B
asic
P
rotector
O
peration
nY
ou can operate your Projector using the
controls on the set itself.
I
BEGIN
I
Press in the MAIN POWER button at
the back of the set to turn the Projector ON.
(For new sets this button is on).
Press the POWER ON/STANDBY
button on the front of the Projector.
A green light above the button lights up.
(DOWN
Press the VOLUME
A
(UP) or'T
(DOWN) buttons to adjust the sound level.
Press the CHAl^EL A (UP) or
(EXDWN) buttons to select TV channels.
To receive all channels in your area you can also
use automatic CHANNEL SCAN
(See page 25 for details).
Remember. When you first switch on,
theTast'Viewed charmel is selected
automatically and its number appears briefly on
the screen. After that, just press the STATUS/
EXIT button to see what charmel the Projector
Remember. EKiring starting of the set
a 'sparking' noise may be heard. This is quite
normal.
TO SWITCH OFF
I
BEGIN
I
Stand By:
Press die POWER ON/STAND BY
button on the front of die Projector.
Completely off:
Press the MAIN POWER button
(at the back of the Projector ) so it goes to
the OUT position.
’ Remember. After switching off
widithe POWER ON/STAND BY button
(or with the Remote ) the cooling fan will
run for a few more minutes. It is advised
not to press the MAIN POWER button
before the fan has stopped.
Projector Back Panel
((pj
TF 1
Front of Projector
Projector Back Panel
• EXTERNAL SPEAKERS O
16