Features – Juniper Systems LandMark CE User Manual
Page 7
LandMark CE User’s Manual 7
Features
Connects with a wide variety of GPS receivers using the NMEA
data streams.
Multiple data interfaces to other programs running concurrently.
Shared memory, data exchange fi le, and wedging your GPS
data into other programs using a Hot Key are options for data
interface.
Sky plot and satellite signal strength bars keep you informed of
GPS status and quality.
Navigation screen allows you to select To and From waypoints.
Features include: a compass ring depicting direction of travel;
an arrow designating direction to destination; and data fi elds
showing distance to go, speed, track, and bearing along with
cross-track error.
Multiple user selectable waypoint fi les, 256 waypoints per fi le.
The number of waypoint fi les are only limited by the available
data storage on the fi eld computer.
Marking waypoint feature provides the option to average a user
specifi ed number of fi x readings.
Hot key, user specifi ed, for triggering a Mark at any point in time;
this key remains hot regardless of which application is active.
Settable serial interface parameters, supporting GPS receiver
input through any of the hardware COM ports, including
Bluetooth.
User selectable datums and display units (statute, metric,
standard (U.S. feet), nautical).
Diagnostics dialogue screen that displays received NMEA data
strings, which are helpful when connecting a GPS receiver.
Toggle switch F10 connects / reconnects any Allegro Com Port.
Bluetooth Com Port usage auto detection, loads Bluetooth
receiver by default if set as a “favorite” when more than one
device is available.
Bluetooth auto reconnect, LandMark CE automatically trys to
reconnect up to three times when a Bluetooth connection is lost.
Bluetooth PC card power saver, LandMark CE registers with
the Bluetooth stack to the GPS receiver status when it is loaded
or unloaded. This reduces time to reload when coming out of
suspend and auto connects when the stack is reloaded.