Juniper Systems LandMark CE - Manual (Page 41)

LandMark CE User’s Manual 41
Each new position is included in the running average until the
specifi ed number of positions to calculate the overall average have
been accumulated. Point Averaging is used when the Mark Point
screen is open.
Note: Masked position information is not included in the average. See
the Mask Tab section in this chapter for more information.
Number of Points
Enter in a Number of Points after you have checked the Point
Averaging box. This user-specifi ed number of GPS positions is used
when calculating averaged waypoints.
Data Exchange File
Check the Data Exchange File option to use the data exchange path
when exporting an averaged point. See the Data Exchange section in
this chapter.
Export button saves to waypt fi le
Check Export button saves to waypt fi le to both save data as a
waypoint, and to export data concurrently when the Export button is
tapped.
Memory Exchange
Check the Memory Exchange option to share location data with
another application. See the Programmer’s chapter for more
information.
Keyboard Wedge
Check the Keyboard Wedge option to activate the wedge Hot Key.
Keyboard Wedge allows the latitude, longitude, and elevation to be
sent directly into another application when the Hot Key is pressed.
This is useful when you want a simple GPS point logged in another
application.
‡