Juniper Systems LandMark CE User Manual
Page 61
LandMark CE User’s Manual 61
Error message:
Every command in the registry comes in a key-value pair. When the
key-value pair is not functioning correctly, LandMark CE cannot
read the application path value. This problem could happen because
of one of the following reasons:
A Set Factory Default was executed and erased the key-value.
The registry has been corrupted.
Registry errors can be fi xed by doing a soft reset. If the soft reset does
not work, reinstall LandMark CE.
LandMark CE General Error Messages
The following are the error or warning messages and the suggested
fi x for those messages that may occur during general LandMark CE
use.
Error message:
Error Reading Waypoint fi le.
A waypoint fi le is saved as a text fi le (.txt), so a user can open it in
Word or Notepad, etc. and modify it. To do this, the data must be
properly formatted. This error message listed above pops up for the
following reason:
The waypoint fi le is not formatted properly.
To fi x this problem use the Convert Waypoint File menu option in
File/Convert Waypoint. It formats your data to the proper usable
format.
Error message:
Error Creating Waypoint fi le.
This error message is used to protect any fi les you may have saved. It
ensures that your fi les are not overwritten. This message appears for
one of the following reasons:
You are trying to duplicate a fi le name.
The path specifi ed to save to or to open from is not valid.
To fi x this problem, rename a fi le, or be sure that the path you have
specifi ed exists.
1)
2)
▲
1)
1)
2)