Juniper Systems LandMark CE - Manual (Page 48)

48 LandMark CE User’s Manual
Available Data Items
Available Data Items are listed options for how and what data are
transferred. Select data items by highlighting and then tapping the
arrow button between the Available Data Items box and the Selected
Data Items box. Available Data Items are then copied into the Selected
Data Items box. Asterisks denote data that can be transferred, while
items without asterisks specify data formatting options.
Selected Data Items
Selected Data Items are items that have been selected from the
Available Data Items list. The order of the items is signifi cant to how
the data are displayed in the concurrent program when the Wedge
Key is pressed.
Items Left
The Items Left starts out with the number 35, indicating how many
total Selected Data Items options are available. As you select items,
this number is reduced by one for each selection.
For example, if you select latitude, tab, longitude, tab, elevation,
down arrow, and then left arrow 3 times, you have used 9 of the 35
options, and the Items Left number reads 26 after this example.
U
The U (up) button moves a Selected Data Item entry up, switching
places with the item above it.
D
The D (down) button moves a Selected Data Item down, switching
places with the item below it.
Del
The Del (delete) button deletes the item highlighted in the Selected
Data Item box.
Internal
Select one of the Internal options to split your whole data string into
smaller segments. One data string includes what you have specifi ed
in the Selected Data Items box display. When your data string is being
sent to the concurrent program, it is entered and separated into
different cells or fi elds according to the option you have selected.