Juniper Systems LandMark CE - Manual (Page 63)

LandMark CE User’s Manual 63
Error message:
Failed to open waypoint fi le and create the converted fi le.
This error message appears for the following reason:
A waypoint fi le conversion fails at the beginning of the process
because the waypoint fi le could not be accessed.
Fix the error by doing either a soft reset or by deleting old fi les to free
up disk space.
Error message:
Failed to create the converted fi le.
This message pops-up when trying to either create a new converted
fi le or write data to a new converted fi le. This message appears for
one of the following reasons:
The disk is full.
The fi le is already open in another application.
To fi x the error, delete some fi les off of the storage disk or close the
fi le being used by the other running application.
Warning message:
Are you sure you want to exit the application?
This message appears for one of the following reasons:
Select the X in the upper right-hand corner of the Allegro screen
to exit the application.
Go to File/Exit to exit the application.
If you would like to exit the application, select Yes. If you do not
want to exit the application, select No.
Warning message:
Waypoint will be permanently deleted! Continue?
This message appears for the following reason:
A waypoint is selected in the waypoint screen, and Delete button
is tapped.
Tap Yes to delete or No to keep the waypoint.
1)
1)
2)
1)
2)
1)