beautypg.com

Juniper Systems LandMark CE User Manual

Page 36

background image

36 LandMark CE User’s Manual

GPS Tab

The GPS tab is used to confi gure the COM port you are using to
attach the GPS receiver. Any changes to the communication port
become effective immediately, a program restart is not needed.

Port

The Port fi eld allows you to select the communication port you are
using. LandMark CE currently supports communication ports COM1
through COM9.

Note: If you are using the Holux receiver, you need to use COM1 and

check the DTR option.

To set the correct port for GPS communication, complete the
following steps:

Using a stylus: Tap the down arrow next to the Port box to access
the drop-down menu and tap on the desired COM Port.

Using the keyboard: Push the Tab key to highlight the Port box.
When the box is highlighted, use the arrows key to move through
the available COM Port options.

Close the Confi guration screen by tapping on OK in the top right
corner of the screen, or by pressing the Enter key.

‡

1)

2)