Interlogix Monitor XL Advanced Installation Guide - Manual (Page 23)

21-3602E rev1.5 Monitor xL™ Advanced Installation Guide 17
 (no) Main Control
Board Config
Callback Only 
(yes)
□
(no)
Telco = Telephone Company
S00515 Keypad Selections
(left to right on keypad screen) Example:
Default Name Selections Description
0 Telco Comms
Test Mode 0=fixed, 1=variable based on backup, 2=variable
based on any area out, 3=Daytime Schedule
00 Telco Normal
Comms Test
Delay Delay table
00 Telco Backup
Comms Test
Delay Delay table
00 Telco Comms
Test Hour 00 = midnight The time (hour) for communications
tests to occur.
00 Telco Comms
Test Minute 0-59 The time (min.) for comms tests to
occur.
0 Telco Comms
Test Day 0=Sun … The day for weekly comms tests to
occur.
Telco = Telephone Company
S0060-9 Ten FallBack Users Keypad Selections (left to right on keypad screen)
10 Fallback Users maximum.
Fallback User #1-10
0-9 00000
0 (UK ACPO) 00001
1 (UK ACPO) 00002
2 (UK ACPO) 00003
3 (UK ACPO) 00004
4 (UK ACPO) 00005
5 (UK ACPO) 00006
6 (UK ACPO) 00007
7 (UK ACPO) 00008
8 (UK ACPO) 00009
9 (UK ACPO) 00010
Up to 5 digits.
0= None, 001-64000.
Custom Circuit Types S00700, 04, 08, 12 Circuit Name
Keypad Selections (left to right on keypad screen)
Default Name
Selections Description
0 Circuit Type 0 =Custom Type
1 = Normally Closed
2 = Normally Open
3 = Normally Closed Single Series EOL
4 = Normally Closed Single Parallel EOL
5 = Normally Open Single Series EOL
6 = Normally Open Single Parallel EOL
7 = Normally Closed Dual Type 1 EOL
8 = Normally Closed Dual Type 2 EOL
9 = Normally Open Dual Type 1 EOL
10 = Normally Open Dual Type 2 EOL
(16
characters) Circuit Band
Name
0 · 00 · 00 · 00 · 00 · 0 ·

Save S005

15