Interlogix Monitor XL Advanced Installation Guide - Manual (Page 17)

21-3602E rev1.5 Monitor xL™ Advanced Installation Guide 11
S00400 Secondary Card Format—Site Code Checking
WARNING: S004  00 – S004  05 Access Control related selections are only available with the addition of
the “Feature Expansion Board”.
Keypad Selections
(left to right on keypad screen) Example:
Default Name
Selections Description
 (no) Check for Site
Code 
(yes)
□
(no)
Whether or not secondary-format tokens must have a specific
site code to be granted entry.
02 Site Code
Position 1 – 40 The position of the 1st digit for the site/system code on these
access tokens.
Position value changes depending on site code length.
08 Site Code
Length 1 – 16 The length of the site code for secondary-format tokens (number
of digits).
Site code when represented as a digital #. Can
not exceed 4 digits.
S00401 Secondary Card Format—Site Codes
Keypad Selections (left to right on keypad screen)
Default Name
Selections Description
0000 1st Site Code
Value 0000 – 9999 The 1st of up to three site/system
codes that can be encoded within
access tokens to be used at the site.
0000 2nd Site Code
Value 0000 – 9999 The 2nd of up to three site/system
codes that can be encoded within
access tokens to be used at the site.
0000 3rd Site Code
Value 0000 – 9999 The 3rd of up to three site/system
codes that can be encoded within
access tokens to be used at the site.
If site code checking is enabled for a secondary card/token format, cards encoded with any one of up to three site code values can be used at the
site. (All other cards will be globally denied access.)
S00402 Card Version-Information (Secondary)
Keypad Selections (left to right on keypad screen)
Default Name
Selections Description
 (no) Check for
Version No. 
(yes)
□
(no)
Whether or not secondary-format
tokens will be checked for a current
version number.
02 Version No.
Position 1 – 40 The position of the 1st digit for the
version number on these access
tokens.
04 Version No.
Length 1 – 8 The length of the version number for
secondary-format tokens (number of
digits).
This feature requires V1.5 door/elevator controller firmware.
 · 02·08 ···········

Save S004

00