beautypg.com

Save s005 – Interlogix Monitor XL Advanced Installation Guide User Manual

Page 22

background image

16

Monitor xL™ Advanced Installation Guide

21-3602E rev1.5

0

Main Control Board
Config Dial Out

0 = No config dial out,

1= internal config dial

out, 2 = external config dial out, 3 = IP

Configurations dial out from main
control board to Director software
PC.
Internal: main control board plug in
modem.
External: external modem


S005
11 Keypad Selections (left to right on keypad screen)
Default Name

Selections

Description

Blank
(16 characters)

Director Software
Configurations Phone
Number

Configurations phone number the system will dial to
contact the Director software PC and transmit system
programming.

The phone number can be preceded with P =pulse dialing (default), or T
=Tone dialing, and can include D =2 sec Delay, A =Star key (tone
dialing), # = Pound Sign (tone dialing), and/or W = Wait for second dial
tone. For Tone dialing, ensure the phone line supports this.


S005
12 Keypad Selections (left to right on keypad screen)
Default Name

Selections

Description

Blank
(16 characters)

Main Control Board
Phone Number

The phone number can be preceded with P =pulse dialing (default), or T
=Tone dialing, and can include D =2 sec Delay, A =Star key (tone
dialing), # = Pound Sign (tone dialing), and/or W = Wait for second dial
tone. For Tone dialing, ensure the phone line supports this.


S005
13 Keypad Selections (left to right on keypad screen)
Default Name

Selections

Description

Blank
(16 characters)

Main Control Board
Modem Init String


S005
14 Keypad Selections
(left to right on keypad screen) Example:


Default Name

Selections

Description

04

Main Control
Board Number
of Rings to
Answer

01 – 15

Used with North American or World
Wide Modems.



(UK ACPO = 02)

0

Suite Security
Telco Mode

NOTE: This feature is
only available with the
addition of the Director
Software and Feature
Expansion Board.

0 = report by area, 1 = report by DigitalAccountID
+ offset

0

Suite Security
Telco Reporting

NOTE: This feature is
only available with the
addition of the Director
Software and Feature
Expansion Board.

0=None, 1=Condos report alarms etc. over telco
dialer

(yes) Main Control

Board
Answering
Machine Defeat

(yes)

(no)

Used with North American or World
Wide Modems.

04

·

0

·

0

·

·······

Save S005

14