Roland 24 bit Digital Studio Workstation VS-890 - Manual (Page 97)

Add Finishing Touches to Your Song
Hold down a [STATUS] button (of any track) and press
[CLEAR], This will clear any existing input and/or track
routing assignments.
4
5
6
Select the track that you wish to playback. Hold down [STOP]
and press the [STATUS] button of the tracks that you wish to
playback. For this example, hold down [STOP] and press the
track 1-4 [STATUS] buttons. [STATUS] will light green.
Hold down [SHIFT] and press [EFFECT-1 (CH EDIT)].
Press [FADER (EDIT)] several times to let the FADER
indicator light green. (Track Mixer)
Press the [SELECT (CH EDIT)] button of the track channel (s)
to which you wish to apply the effect. For this example, press
the track channel 1-4
[SELECT (CH EDIT)] button.
[SELECT (CH EDIT)] will light.
8
Rotate the TIME/VALUE dial to turn the effect on/off. Select
either "PreFade" or "PstFade."
Press [EFFECT] several times until "EFFECT-1 PRM ?"
appears in the display.
Be sure to turn off the effect
switch of track channels 5
and 6.
Press [YES (ENTER)]. The number and name of the currently
selected effect will be displayed, and you will be able to select
the effect.
Rotate the TIME/VALUE dial to select the effect you wish to
use. For this example, select an effect such as "POOO
RV:LargeHall."
After you have selected an effect, press [YES (ENTER)].
i
COt^rriON MARKER»
F H 1 Se 1 =RU: Lat-geHa 1 1 - *
MEASURE BEAT